[Flash78h]

I install wasabi in 12 wii's and don't have problems in installation.

The last installation have problem to boot wii. Wasabi was red ligth.



The solution is easy, i change clk wire to another more longer.



When wire is a little more shorter wasabi don't boot.



I have some test for change position of clk wire and wasabi don't boot.

http://www.youtube.com/watch?v=AaX7VIcjmSA

This is more easy solution i think.

[thewarden]

Congratulations, hope this turns out to be permanant soloution.

[nine0nine]

messiah memories

an old trick for this problem was spiralling the clock wire around the gnd cable, or another run of cable that was grounded. I think the main thing is to avoid the little component that's between those 2 ic's though.

[lenselijer]

thank you for this fix, finally my wasabi chip works.

I only had to change the clk wire for a more longer one

[taleboblen]

Is this for real?

[Flash78h]

Originally Posted by taleboblen

Is this for real?

Yes, some people solve wasabi problem with this "fix", sometimes you can need cardboard to protect installation for motherboard noise.

[taleboblen]

Originally Posted by Flash78h

Yes, some people solve wasabi problem with this "fix", sometimes you can need cardboard to protect installation for motherboard noise.

Just read somewhere else, that shortening the clock wire would fix the Wasabi by reducing noise..

[Sh0RTy]

yeah , thiz works fine with my Install....

Thanks alot..

greets
Sh0RTy

[taleboblen]

Anyone else with the RED light issue tried this?

[Manzzon]

Will try this when Im at work again, have two drives with this problem.

Very interesting solution...